MICRO 100
-
4 FL - 0.5000" (1/2) Cutter DIA x 0.030" Radius x 1.250" (1-1/4) LOC
MICRO 100
$85.850.5000" (1/2) Cutter DIA x 0.030" Radius x 1.250" (1-1/4) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 4 FlutesVHM-5125-4$85.85 -
Out of stock
5 FL - 0.5000" (1/2) Cutter DIA x 1.000" (1) LOC - nACRo® Coated
MICRO 100
$93.650.5000" (1/2) Cutter DIA x 1.000" (1) Length of Cut Carbide Square End Mill for Steels and High Temperature Alloys, 5 Flutes, nACRo® CoatedVHM-500-5K$93.65 -
Out of stock
5 FL - 0.5000" (1/2) Cutter DIA x 0.125" (1/8) Radius x 1.000" (1) LOC
MICRO 100
$80.800.5000" (1/2) Cutter DIA x 0.125" (1/8) Radius x 1.000" (1) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 5 FlutesVHM-500-5-125$80.80 -
#11-32 - 0.5000" (1/2) Cutter DIA - 5 FL
MICRO 100
$117.900.5000" (1/2) Cutter DIA Carbide Single Form - Reduced Shank #11-32 Thread Milling Cutter, 5 FlutesTM-500$117.90 -
0.5000" (1/2) Cutter DIA x 0.900" Neck Length x 220° Wrap Angle - 4 FL
MICRO 100
$197.950.5000" (1/2) Cutter DIA x 0.900" Neck Length x 220° Carbide Undercutting End Mill, 4 FlutesSBM-500-4$197.95 -
0.5000" (1/2) Cutter DIA x 0.900" Neck Length x 220° Wrap Angle - 2 FL
MICRO 100
$197.950.5000" (1/2) Cutter DIA x 0.900" Neck Length x 220° Carbide Undercutting End Mill, 2 FlutesSBM-500-2$197.95 -
2 FL - 0.0050" Cutter DIA x 0.007" LOC - AlTiN Coated
MICRO 100
$61.400.0050" Cutter DIA x 0.007" Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSME-005-2X$61.40 -
2 FL - 0.0050" Cutter DIA x 0.007" LOC
MICRO 100
$58.550.0050" Cutter DIA x 0.007" Length of Cut Carbide Square End Mill, 2 FlutesSME-005-2$58.55 -
4 FL - 0.5000" (1/2) Cutter DIA x 0.625" (5/8) LOC - AlTiN Coated
MICRO 100
$77.200.5000" (1/2) Cutter DIA x 0.625" (5/8) Length of Cut Carbide Square End Mill, 4 Flutes, AlTiN CoatedSEM-500-04X$77.20 -
4 FL - 0.5000" (1/2) Cutter DIA x 0.625" (5/8) LOC
MICRO 100
$67.050.5000" (1/2) Cutter DIA x 0.625" (5/8) Length of Cut Carbide Square End Mill, 4 FlutesSEM-500-04$67.05 -
3 FL - 0.5000" (1/2) Cutter DIA x 0.625" (5/8) LOC - AlTiN Coated
MICRO 100
$77.200.5000" (1/2) Cutter DIA x 0.625" (5/8) Length of Cut Carbide Square End Mill, 3 Flutes, AlTiN CoatedSEM-500-03X$77.20 -
2 FL - 0.5000" (1/2) Cutter DIA x 0.625" (5/8) LOC - AlTiN Coated
MICRO 100
$77.200.5000" (1/2) Cutter DIA x 0.625" (5/8) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-500-02X$77.20