MICRO 100
-
Quick Change - Right Hand - 0.1100" (2.8 mm) Min Bore DIA x 0.250" (1/4) Max Bore Depth x 0.0169" Projection x 1.50" (1-1/2) OAL #8-32 - AlTiN Coated
MICRO 100
$52.200.1100" (2.8 mm) Min Bore DIA x 0.250" (1/4) Max Bore Depth x 0.0169" Projection x 0.1875" (3/16) Shank DIA x 1.50" (1-1/2) Overall Length #8-32 - Carbide Quick Change - UN Thread - Topping Right...QTT-000832-025X$52.20 -
0.1875" (3/16) Drill DIA x 0.625" (5/8) Flute Length - 2 FL - AlTiN Coated
MICRO 100
$39.050.1875" (3/16) Drill DIA x 0.625" (5/8) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-187-100X$39.05 -
0.1250" (1/8) Drill DIA x 0.375" (3/8) Flute Length - 2 FL - AlTiN Coated
MICRO 100
$37.650.1250" (1/8) Drill DIA x 0.375" (3/8) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-125-140X$37.65 -
0.1875" (3/16) Drill DIA x 0.567" Flute Length - AlTiN Coated
MICRO 100
$33.050.1875" (3/16) Drill DIA x 0.567" Flute Length Carbide Quick Change - Spade Drill, AlTiN CoatedQSD-187X$33.05 -
0.1250" (1/8) Drill DIA x 0.428" Flute Length - AlTiN Coated
MICRO 100
$26.500.1250" (1/8) Drill DIA x 0.428" Flute Length Carbide Quick Change - Spade Drill, AlTiN CoatedQSD-125X$26.50 -
0.0938" Drill DIA x 0.445" Flute Length - AlTiN Coated
MICRO 100
$24.450.0938" Drill DIA x 0.445" Flute Length Carbide Quick Change - Spade Drill, AlTiN CoatedQSD-093X$24.45 -
0.0625" (1/16) Drill DIA x 0.289" Flute Length - AlTiN Coated
MICRO 100
$23.700.0625" (1/16) Drill DIA x 0.289" Flute Length Carbide Quick Change - Spade Drill, AlTiN CoatedQSD-062X$23.70 -
0.0312" (1/32) Drill DIA x 0.202" Flute Length - AlTiN Coated
MICRO 100
$23.000.0312" (1/32) Drill DIA x 0.202" Flute Length Carbide Quick Change - Spade Drill, AlTiN CoatedQSD-031X$23.00 -
3 FL - 0.1875" (3/16) Cutter DIA x 0.375" (3/8) LOC - AlTiN Coated
MICRO 100
$28.500.1875" (3/16) Cutter DIA x 0.375" (3/8) Length of Cut Carbide Square End Mill, 3 Flutes, AlTiN CoatedSEM-187-03X$28.50 -
2 FL - 0.1875" (3/16) Cutter DIA x 0.375" (3/8) LOC - AlTiN Coated
MICRO 100
$28.500.1875" (3/16) Cutter DIA x 0.375" (3/8) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-187-02X$28.50 -
4 FL - 0.1719" (11/64) Cutter DIA x 0.313" LOC - AlTiN Coated
MICRO 100
$28.500.1719" (11/64) Cutter DIA x 0.313" Length of Cut Carbide Square End Mill, 4 Flutes, AlTiN CoatedSEM-171-04X$28.50 -
3 FL - 0.1719" (11/64) Cutter DIA x 0.313" LOC - AlTiN Coated
MICRO 100
$28.500.1719" (11/64) Cutter DIA x 0.313" Length of Cut Carbide Square End Mill, 3 Flutes, AlTiN CoatedSEM-171-03X$28.50