MICRO 100
-
0.1875" (3/16) Drill DIA x 0.625" (5/8) Flute Length - 2 FL - AlTiN Coated
MICRO 100
$39.050.1875" (3/16) Drill DIA x 0.625" (5/8) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-187-100X$39.05 -
0.1250" (1/8) Drill DIA x 0.375" (3/8) Flute Length - 2 FL - AlTiN Coated
MICRO 100
$37.650.1250" (1/8) Drill DIA x 0.375" (3/8) Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-125-140X$37.65 -
2 FL - 0.1875" (3/16) Cutter DIA x 0.375" (3/8) LOC - AlTiN Coated
MICRO 100
$28.500.1875" (3/16) Cutter DIA x 0.375" (3/8) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-187-02X$28.50 -
2 FL - 0.1562" (5/32) Cutter DIA x 0.313" LOC - AlTiN Coated
MICRO 100
$28.500.1562" (5/32) Cutter DIA x 0.313" Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-156-02X$28.50 -
2 FL - 0.1406" (9/64) Cutter DIA x 0.250" (1/4) LOC - AlTiN Coated
MICRO 100
$28.500.1406" (9/64) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 2 Flutes, AlTiN CoatedSEM-140-02X$28.50 -
Out of stock
0.0200" (.5 mm) Drill DIA x 0.060" Flute Length - 2 FL - AlTiN Coated
MICRO 100
$44.350.0200" (.5 mm) Drill DIA x 0.060" Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-020-140X$44.35 -
0.1181" (3 mm) Drill DIA x 0.354" Flute Length - 2 FL - AlTiN Coated
MICRO 100
$37.650.1181" (3 mm) Drill DIA x 0.354" Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-118-140X$37.65 -
0.0900" Drill DIA x 0.270" Flute Length - 2 FL - AlTiN Coated
MICRO 100
$37.650.0900" Drill DIA x 0.270" Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-090-140X$37.65 -
0.0600" Drill DIA x 0.180" Flute Length - 2 FL - AlTiN Coated
MICRO 100
$37.650.0600" Drill DIA x 0.180" Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-060-090X$37.65 -
Out of stock
0.0500" Drill DIA x 0.150" Flute Length - 2 FL - AlTiN Coated
MICRO 100
$34.850.0500" Drill DIA x 0.150" Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-050-140X$34.85 -
0.0450" Drill DIA x 0.135" Flute Length - 2 FL - AlTiN Coated
MICRO 100
$37.650.0450" Drill DIA x 0.135" Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-045-140X$37.65 -
0.0400" Drill DIA x 0.120" Flute Length - 2 FL - AlTiN Coated
MICRO 100
$37.650.0400" Drill DIA x 0.120" Flute Length Carbide Quick Change - Spot Drill, 2 Flutes, AlTiN CoatedQSPD-040-090X$37.65