CORNER RADIUS, 45 HELIX
END MILLS FOR ALUMINUM AND NON FERROUS MATERIAL, 3 FLUTE,CORNER RADIUS 45° HELIX
The high helix on the H45AL-3 increases shearing action, which leaves a cleaner finish on your part, while its corner radius profile promotes strength for prolonged tool life in both traditional roughing and High Efficiency Milling toolpaths.
-
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0100" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - ZPLUS Coated, 83660
HELICAL
$113.100.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0100" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-L-30500-R.010)HELSO1-83660$113.10 -
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - ZPLUS Coated, 83668
HELICAL
$113.100.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-L-30500-R.020)HELSO1-83668$113.10 -
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated, 83667
HELICAL
$95.300.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-L-30500-R.020)HELSO1-83667$95.30 -
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated, 83683
HELICAL
$95.300.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-L-30500-R.125)HELSO1-83683$95.30 -
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0100" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated, 83659
HELICAL
$95.300.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0100" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-L-30500-R.010)HELSO1-83659$95.30 -
Out of stock
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0600" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated, 81625
HELICAL
$95.300.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0600" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-L-30500-R.060)HELSO1-81625$95.30 -
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - ZPLUS Coated, 83684
HELICAL
$113.100.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-L-30500-R.125)HELSO1-83684$113.10 -
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0600" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - ZPLUS Coated, 81626
HELICAL
$113.100.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0600" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-L-30500-R.060)HELSO1-81626$113.10