CORNER RADIUS, 40 HELIX, VARIABLE PITCH
END MILLS FOR ALUMINUM AND NON FERROUS MATERIAL, 3 FLUTE,CORNER RADIUS 40° HELIX VARIABLE PITCH
The H40ALV-3’s end geometry contains a wiper flat, designed to swiftly remove scallop marks on the floor of a part to leave a superior finish in aluminum and non-ferrous alloys. This feature is included on all square profiles and where the tool’s corner radius does not exceed 20 percent of the cutter diameter.
-
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.2500" (1/4) Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$139.070.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.2500" (1/4) Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30750-R.250)HELSO1-48615$139.07 -
3 FL - Corner Radius - 40° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0300" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$39.500.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.0300" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-M-30187-R.030)HELSO1-48070$39.50 -
3 FL - Corner Radius - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0600" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$63.300.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0600" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-SR-30500-R.060)HELSO1-48380$63.30 -
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$180.400.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30750-R.060)HELSO1-48595$180.40 -
3 FL - Corner Radius - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$49.800.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-L-30312-R.030)HELSO1-87000$49.80 -
3 FL - Corner Radius - 40° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0100" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$53.500.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0100" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-L-30250-R.010)HELSO1-86985$53.50 -
3 FL - Corner Radius - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0600" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$60.200.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0600" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-L-30312-R.060)HELSO1-87003$60.20 -
3 FL - Corner Radius - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0900" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$58.200.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0900" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-M-30375-R.090)HELSO1-87020$58.20