CORNER RADIUS, 40 HELIX, VARIABLE PITCH
END MILLS FOR ALUMINUM AND NON FERROUS MATERIAL, 3 FLUTE,CORNER RADIUS 40° HELIX VARIABLE PITCH
The H40ALV-3’s end geometry contains a wiper flat, designed to swiftly remove scallop marks on the floor of a part to leave a superior finish in aluminum and non-ferrous alloys. This feature is included on all square profiles and where the tool’s corner radius does not exceed 20 percent of the cutter diameter.
-
3 FL - Corner Radius - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.4375" (7/16) LOC x 2.0000" (2) OAL - ZPLUS Coated
HELICAL
$48.500.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-S-30312-R.030)HELSO1-86127$48.50 -
3 FL - Corner Radius - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0600" Radius x 0.4375" (7/16) LOC x 2.0000" (2) OAL - ZPLUS Coated
HELICAL
$48.500.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0600" Radius x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-S-30312-R.060)HELSO1-86133$48.50 -
3 FL - Corner Radius - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$38.800.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30312-R.030)HELSO1-86126$38.80 -
3 FL - Corner Radius - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0100" Radius x 0.4375" (7/16) LOC x 2.0000" (2) OAL - ZPLUS Coated
HELICAL
$48.500.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0100" Radius x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-S-30312-R.010)HELSO1-86121$48.50 -
3 FL - Corner Radius - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0600" Radius x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$38.800.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0600" Radius x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30312-R.060)HELSO1-86132$38.80 -
3 FL - Corner Radius - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0100" Radius x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$38.800.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0100" Radius x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30312-R.010)HELSO1-86120$38.80