CORNER RADIUS, 40 HELIX, VARIABLE PITCH
END MILLS FOR ALUMINUM AND NON FERROUS MATERIAL, 3 FLUTE,CORNER RADIUS 40° HELIX VARIABLE PITCH
The H40ALV-3’s end geometry contains a wiper flat, designed to swiftly remove scallop marks on the floor of a part to leave a superior finish in aluminum and non-ferrous alloys. This feature is included on all square profiles and where the tool’s corner radius does not exceed 20 percent of the cutter diameter.
-
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0150" (1/64) Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$203.200.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0150" (1/64) Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-S-30750-R.015)HELSO1-83550$203.20 -
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0200" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$203.200.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0200" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-S-30750-R.020)HELSO1-87051$203.20 -
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.1900" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$180.400.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.1900" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30750-R.190)HELSO1-48610$180.40 -
Out of stock
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0200" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$180.400.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0200" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30750-R.020)HELSO1-87050$180.40 -
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.2500" (1/4) Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$139.070.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.2500" (1/4) Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30750-R.250)HELSO1-48615$139.07 -
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$180.400.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30750-R.060)HELSO1-48595$180.40 -
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.1900" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$205.100.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.1900" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-S-30750-R.190)HELSO1-48611$205.10 -
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$180.400.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30750-R.030)HELSO1-48590$180.40