HELICAL
5 FL - Corner Radius - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0100" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - NPLUS Coated
- SKU:
- HELSO1-84144
- MPN:
- 84144
- Shipping:
- Calculated at Checkout
Description
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0100" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Aluminum, 5 Flutes, NPLUS Coated - (HVAL-026-50375-R.010)
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Length of Cut: |
1.0000" (1) |
Overall Length: |
3.0000" (3) |
Corner Radius: |
0.0100" |
Flutes: |
5 |
LOC Multiple: |
(2.6x) |
Shank Diameter: |
0.3750" (3/8) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
NPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
5 FL - Corner Radius - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0100" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - NPLUS CoatedÂ
HELICAL
$86.90
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0100" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Aluminum, 5 Flutes, NPLUS Coated -...
HELSO1-84236
5 FL - Corner Radius - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - NPLUS CoatedÂ
HELICAL
$80.45
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Aluminum, 5 Flutes, NPLUS Coated -...
HELSO1-84242
5 FL - Corner Radius - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0200" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - NPLUS Coated
HELICAL
$156.50
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0200" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner...
HELSO1-89947
5 FL - Corner Radius - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - NPLUS Coated
HELICAL
$75.35
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Aluminum, 5 Flutes, NPLUS Coated -...
HELSO1-84150
5 FL - Corner Radius - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0100" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - TPLUS Coated
HELICAL
$77.10
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0100" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Stainless and High Temp, 5 Flutes,...
HELSO1-82991