HELICAL
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.7500" (4-3/4) LOC x 7.0000" (7) OAL - Uncoated
- SKU:
- HELSO1-87068
- MPN:
- 87068
- Shipping:
- Calculated at Checkout
Description
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.7500" (4-3/4) Length of Cut x 7.0000" (7) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-Y-30750)
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Length of Cut: |
4.7500" (4-3/4) |
Overall Length: |
7.0000" (7) |
Flutes: |
3 |
LOC Multiple: |
(6.3x) |
Shank Diameter: |
0.7500" (3/4) |
Metric: |
N |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.7500" (4-3/4) LOC x 7.0000" (7) OAL - ZPLUS Coated
HELICAL
$457.45
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.7500" (4-3/4) Length of Cut x 7.0000" (7) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-Y-30750)
HELSO1-87069
4 FL - Square - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.7500" (4-3/4) LOC x 7.0000" (7) OAL - APLUS Coated
HELICAL
$304.00
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.7500" (4-3/4) Length of Cut x 7.0000" (7) Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-X-40750)
HELSO1-84692
2 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) LOC x 7.0000" (7) OAL - Uncoated
HELICAL
$394.10
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) Length of Cut x 7.0000" (7) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-X-20750)
HELSO1-00705
4 FL - Square - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.7500" (4-3/4) LOC x 7.0000" (7) OAL - TPLUS Coated
HELICAL
$341.00
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.7500" (4-3/4) Length of Cut x 7.0000" (7) Overall Length Carbide Square End Mill for Stainless and High Temp, 4 Flutes, TPLUS Coated -...
HELSO1-88172
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$153.50
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-S-30750)
HELSO1-03645