HELICAL
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
- SKU:
- HELSO1-81561
- MPN:
- 81561
- Shipping:
- Calculated at Checkout
Description
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-A-30750)
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Length of Cut: |
2.0000" (2) |
Overall Length: |
4.0000" (4) |
Flutes: |
3 |
LOC Multiple: |
(2.5x) |
Shank Diameter: |
0.7500" (3/4) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$210.75
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-A-30750)
HELSO1-81562
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$153.50
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-S-30750)
HELSO1-03645
2 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) LOC x 7.0000" (7) OAL - Uncoated
HELICAL
$394.10
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) Length of Cut x 7.0000" (7) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-X-20750)
HELSO1-00705
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 4.0000" (4) OAL x 2.0000" (2) Reach - Uncoated
HELICAL
$184.80
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 4.0000" (4) Overall Length x 2.0000" (2) Reach Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated -...
HELSO1-19405
2 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$150.60
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-S-20750)
HELSO1-00645