HELICAL
3 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) LOC x 6.0000" (6) OAL - ZPLUS Coated
- SKU:
- HELSO1-03617
- MPN:
- 03617
- Shipping:
- Calculated at Checkout
Description
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) Length of Cut x 6.0000" (6) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-X-30625)
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Length of Cut: |
3.7500" (3-3/4) |
Overall Length: |
6.0000" (6) |
Flutes: |
3 |
LOC Multiple: |
(6x) |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
2 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) LOC x 6.0000" (6) OAL - ZPLUS Coated
HELICAL
$212.97
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) Length of Cut x 6.0000" (6) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-X-20625)
HELSO1-00617
3 FL - Square - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) LOC x 6.0000" (6) OAL - ZPLUS Coated
HELICAL
$297.95
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) Length of Cut x 6.0000" (6) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-X-30625)
HELSO1-01617
3 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) LOC x 6.0000" (6) OAL - Uncoated
HELICAL
$209.50
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) Length of Cut x 6.0000" (6) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-X-30625)
HELSO1-03615
2 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) LOC x 6.0000" (6) OAL - Uncoated
HELICAL
$274.90
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) Length of Cut x 6.0000" (6) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-X-20625)
HELSO1-00615
3 FL - Square - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) LOC x 6.0000" (6) OAL - Uncoated
HELICAL
$275.10
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 3.7500" (3-3/4) Length of Cut x 6.0000" (6) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-X-30625)
HELSO1-01615