HELICAL
3 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - ZPLUS Coated
- SKU:
- HELSO1-03602
- MPN:
- 03602
- Shipping:
- Calculated at Checkout
Description
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-L-30625)
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Length of Cut: |
2.5000" (2-1/2) |
Overall Length: |
5.0000" (5) |
Flutes: |
3 |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Shank Length: |
2.5000" (2-1/2) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
2 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - ZPLUS Coated
HELICAL
$182.25
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-L-20625)
HELSO1-00602
3 FL - Square - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - ZPLUS Coated
HELICAL
$182.35
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-L-30625)
HELSO1-01602
3 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$164.20
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-L-30625)
HELSO1-03600
5 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - APLUS Coated
HELICAL
$204.50
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-L-50625)
HELSO1-44352
2 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$161.00
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-L-20625)
HELSO1-00600