HELICAL
3 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 3.0000" (3) LOC x 5.0000" (5) OAL - ZPLUS Coated
- SKU:
- HELSO1-82856
- MPN:
- 82856
- Shipping:
- Calculated at Checkout
Description
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 3.0000" (3) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-Y-30375)
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Length of Cut: |
3.0000" (3) |
Overall Length: |
5.0000" (5) |
Flutes: |
3 |
LOC Multiple: |
(8x) |
Shank Diameter: |
0.3750" (3/8) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 35¡ Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 3.0000" (3) LOC x 5.0000" (5) OAL - ZPLUS Coated
HELICAL
$106.15
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 3.0000" (3) Length of Cut x 5.0000" (5) Overall Length Carbide 35¡ Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-Y-30375)
HELSO1-88054
3 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 3.0000" (3) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$93.50
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 3.0000" (3) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-Y-30375)
HELSO1-82855
3 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$49.45
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-R-30375)
HELSO1-03347
3 FL - Square - 35¡ Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 3.0000" (3) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$92.60
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 3.0000" (3) Length of Cut x 5.0000" (5) Overall Length Carbide 35¡ Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-Y-30375)
HELSO1-88053
2 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$48.85
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-R-20375)
HELSO1-00347