HELICAL
3 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
- SKU:
- HELSO1-03240
- MPN:
- 03240
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-S-30312)
View AllClose
Additional Information
Cutter Diameter: |
0.3125" (5/16) |
Length of Cut: |
0.4375" (7/16) |
Overall Length: |
2.0000" (2) |
Flutes: |
3 |
LOC Multiple: |
(1x) |
Shank Diameter: |
0.3125" (5/16) |
Metric: |
N |
Shank Length: |
1.5625" (1-9/16) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
2 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$28.40
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-S-20312)
HELSO1-00240
3 FL - Square - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$32.50
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-30312)
HELSO1-81405
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$29.00
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30312)
HELSO1-01240
2 FL - Ball - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$31.75
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-S-20312-BN)
HELSO1-17240
3 FL - Square - 40¡ Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL
HELICAL
$55.50
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 40¡ Helix Square End Mill for Aluminum, 3 Flutes - (H40ALV-S-30312)
HELSO1-87861