HELICAL
3 FL - Square - 45° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.3750" (1-3/8) LOC x 3.0000" (3) OAL - ZPLUS Coated
- SKU:
- HELSO1-87065
- MPN:
- 87065
- Shipping:
- Calculated at Checkout
Description
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.3750" (1-3/8) Length of Cut x 3.0000" (3) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-LX-30187)
View AllClose
Additional Information
Cutter Diameter: |
0.1875" (3/16) |
Length of Cut: |
1.3750" (1-3/8) |
Overall Length: |
3.0000" (3) |
Flutes: |
3 |
LOC Multiple: |
(7.3x) |
Shank Diameter: |
0.1875" (3/16) |
Metric: |
N |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 35¡ Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.3750" (1-3/8) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$51.55
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.3750" (1-3/8) Length of Cut x 3.0000" (3) Overall Length Carbide 35¡ Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-88048
3 FL - Square - 40° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.3750" (1-3/8) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$40.65
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.3750" (1-3/8) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-82392
3 FL - Ball - 40° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.3750" (1-3/8) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$47.65
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.3750" (1-3/8) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-82456
3 FL - Square - 45° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.3750" (1-3/8) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$42.20
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.3750" (1-3/8) Length of Cut x 3.0000" (3) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-LX-30187)
HELSO1-87064
2 FL - Square - 45¡ Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$46.35
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) Length of Cut x 3.0000" (3) Overall Length Carbide 45¡ Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated -...
HELSO1-88702