HELICAL
3 FL - Square - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
- SKU:
- HELSO1-87061
- MPN:
- 87061
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-X-30125)
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Length of Cut: |
1.0000" (1) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
3 |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$36.35
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-86961
3 FL - Square - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$24.45
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-03047
3 FL - Square - 35¡ Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$37.95
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35¡ Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-X-30125)
HELSO1-88046
3 FL - Square - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$30.30
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-X-30125)
HELSO1-87060
3 FL - Square - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.8750" (7/8) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$35.15
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.8750" (7/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-82850