HELICAL
3 FL - Square - 40° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) LOC x 7.0000" (7) OAL - ZPLUS Coated
- SKU:
- HELSO1-86073
- MPN:
- 86073
- Shipping:
- Calculated at Checkout
Description
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) Length of Cut x 7.0000" (7) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-L-31000)
View AllClose
Additional Information
Cutter Diameter: |
1.0000" (1) |
Length of Cut: |
4.2500" (4-1/4) |
Overall Length: |
7.0000" (7) |
Flutes: |
3 |
LOC Multiple: |
(4.2x) |
Shank Diameter: |
1.0000" (1) |
Metric: |
N |
Shank Length: |
2.7500" (2-3/4) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Ball - 40° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) LOC x 7.0000" (7) OAL - ZPLUS Coated
HELICAL
$483.25
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) Length of Cut x 7.0000" (7) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-L-31000-BN)
HELSO1-86087
3 FL - Square - 35° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) LOC x 7.0000" (7) OAL - ZPLUS Coated
HELICAL
$597.85
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) Length of Cut x 7.0000" (7) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-X-31000)
HELSO1-01797
3 FL - Square - 40° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) LOC x 7.0000" (7) OAL - Uncoated
HELICAL
$418.50
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) Length of Cut x 7.0000" (7) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-L-31000)
HELSO1-86072
4 FL - Square - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) LOC x 7.0000" (7) OAL - APLUS Coated
HELICAL
$573.90
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) Length of Cut x 7.0000" (7) Overall Length Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated - (HSV-L-41000)
HELSO1-30752
3 FL - Ball - 40° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) LOC x 7.0000" (7) OAL - Uncoated
HELICAL
$440.20
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.2500" (4-1/4) Length of Cut x 7.0000" (7) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-L-31000-BN)
HELSO1-86086