HELICAL
3 FL - Square - 40° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) LOC x 12.5000" (12-1/2) OAL x 9.5000" (9-1/2) Reach - Uncoated
- SKU:
- HELSO1-86510
- MPN:
- 86510
- Shipping:
- Calculated at Checkout
Description
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) Length of Cut x 12.5000" (12-1/2) Overall Length x 9.5000" (9-1/2) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-RN-X-31000)
View AllClose
Additional Information
Cutter Diameter: |
1.0000" (1) |
Neck Diameter: |
0.9500" |
Length of Cut: |
1.2500" (1-1/4) |
Overall Reach: |
9.5000" (9-1/2) |
Overall Length: |
12.5000" (12-1/2) |
Flutes: |
3 |
LOC Multiple: |
(1.2x) |
Shank Diameter: |
1.0000" (1) |
Metric: |
N |
Shank Length: |
3.0000" (3) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
Out of stock
3 FL - Ball - 40° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) LOC x 12.5000" (12-1/2) OAL x 9.5000" (9-1/2) Reach - Uncoated
HELICAL
$558.97
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) Length of Cut x 12.5000" (12-1/2) Overall Length x 9.5000" (9-1/2) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes,...
HELSO1-47480
3 FL - Square - 40° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) LOC x 12.5000" (12-1/2) OAL x 9.5000" (9-1/2) Reach - ZPLUS Coated
HELICAL
$847.60
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) Length of Cut x 12.5000" (12-1/2) Overall Length x 9.5000" (9-1/2) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-86511
3 FL - Ball - 40° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) LOC x 12.5000" (12-1/2) OAL x 9.5000" (9-1/2) Reach - ZPLUS Coated
HELICAL
$869.30
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) Length of Cut x 12.5000" (12-1/2) Overall Length x 9.5000" (9-1/2) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-47481
3 FL - Square - 40° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$279.60
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-S-31000)
HELSO1-48690
3 FL - Square - 40° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) LOC x 9.0000" (9) OAL x 6.0000" (6) Reach - Uncoated
HELICAL
$472.20
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 1.2500" (1-1/4) Length of Cut x 9.0000" (9) Overall Length x 6.0000" (6) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated -...
HELSO1-46800