HELICAL
3 FL - Square - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) LOC x 6.5000" (6-1/2) OAL - Uncoated
- SKU:
- HELSO1-86966
- MPN:
- 86966
- Shipping:
- Calculated at Checkout
Description
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) Length of Cut x 6.5000" (6-1/2) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-LX-30750)
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Length of Cut: |
4.0000" (4) |
Overall Length: |
6.5000" (6-1/2) |
Flutes: |
3 |
LOC Multiple: |
(5.3x) |
Shank Diameter: |
0.7500" (3/4) |
Metric: |
N |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 35° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) LOC x 6.5000" (6-1/2) OAL - Uncoated
HELICAL
$395.00
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) Length of Cut x 6.5000" (6-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-X-30750)
HELSO1-01705
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) LOC x 6.5000" (6-1/2) OAL - Uncoated
HELICAL
$401.70
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) Length of Cut x 6.5000" (6-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-X-30750)
HELSO1-03705
3 FL - Square - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) LOC x 6.5000" (6-1/2) OAL - ZPLUS Coated
HELICAL
$282.95
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) Length of Cut x 6.5000" (6-1/2) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-86967
3 FL - Square - 35° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) LOC x 6.5000" (6-1/2) OAL - ZPLUS Coated
HELICAL
$424.55
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) Length of Cut x 6.5000" (6-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-X-30750)
HELSO1-01707
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) LOC x 6.5000" (6-1/2) OAL - ZPLUS Coated
HELICAL
$431.25
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 4.0000" (4) Length of Cut x 6.5000" (6-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-X-30750)
HELSO1-03707