HELICAL
3 FL - Square - 40° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) LOC x 4.0000" (4) OAL - ZPLUS Coated
- SKU:
- HELSO1-86965
- MPN:
- 86965
- Shipping:
- Calculated at Checkout
Description
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-ML-30625)
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Length of Cut: |
2.5000" (2-1/2) |
Overall Length: |
5.0000" (5) |
Flutes: |
3 |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$144.45
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-M-30625)
HELSO1-82400
3 FL - Square - 40° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$126.00
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-ML-30625)
HELSO1-86964
3 FL - Square - 40° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$143.45
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-48536
3 FL - Ball - 40° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$160.55
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-M-30625-BN)
HELSO1-86979
3 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - ZPLUS Coated
HELICAL
$185.35
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-L-30625)
HELSO1-03602