HELICAL
3 FL - Square - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 8.0000" (8) OAL x 6.0000" (6) Reach - Uncoated
- SKU:
- HELSO1-86506
- MPN:
- 86506
- Shipping:
- Calculated at Checkout
Description
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 8.0000" (8) Overall Length x 6.0000" (6) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-RN-Z-30500)
View AllClose
Additional Information
Cutter Diameter: |
0.5000" (1/2) |
Neck Diameter: |
0.4750" |
Length of Cut: |
0.6250" (5/8) |
Overall Reach: |
6.0000" (6) |
Overall Length: |
8.0000" (8) |
Flutes: |
3 |
LOC Multiple: |
(1.2x) |
Shank Diameter: |
0.5000" (1/2) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Ball - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 8.0000" (8) OAL x 6.0000" (6) Reach - Uncoated
HELICAL
$127.20
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 8.0000" (8) Overall Length x 6.0000" (6) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated -...
HELSO1-86520
3 FL - Square - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 8.0000" (8) OAL x 6.0000" (6) Reach - ZPLUS Coated
HELICAL
$113.65
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 8.0000" (8) Overall Length x 6.0000" (6) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-86507
3 FL - Ball - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 8.0000" (8) OAL x 6.0000" (6) Reach - ZPLUS Coated
HELICAL
$128.45
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 8.0000" (8) Overall Length x 6.0000" (6) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated...
HELSO1-86521
3 FL - Square - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 3.7500" (3-3/4) Reach - Uncoated
HELICAL
$96.00
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 3.7500" (3-3/4) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-81483
2 FL - Square - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 3.3750" (3-3/8) Reach - Uncoated
HELICAL
$104.40
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 3.3750" (3-3/8) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes,...
HELSO1-02315