HELICAL
3 FL - Square - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 2.1250" (2-1/8) Reach - Uncoated
- SKU:
- HELSO1-86504
- MPN:
- 86504
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 2.1250" (2-1/8) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-RN-M-30312)
View AllClose
Additional Information
Cutter Diameter: |
0.3125" (5/16) |
Neck Diameter: |
0.2960" |
Length of Cut: |
0.4375" (7/16) |
Overall Reach: |
2.1250" (2-1/8) |
Overall Length: |
4.0000" (4) |
Flutes: |
3 |
LOC Multiple: |
(1.4x) |
Shank Diameter: |
0.3125" (5/16) |
Metric: |
N |
Shank Length: |
1.8750" (1-7/8) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 2.1250" (2-1/8) Reach - Uncoated
HELICAL
$69.30
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 2.1250" (2-1/8) Reach Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-19180
3 FL - Ball - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 2.1250" (2-1/8) Reach - Uncoated
HELICAL
$63.30
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 2.1250" (2-1/8) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes,...
HELSO1-86516
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 2.1250" (2-1/8) Reach - Uncoated
HELICAL
$68.40
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 2.1250" (2-1/8) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-04180
2 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 2.1250" (2-1/8) Reach - Uncoated
HELICAL
$70.40
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 2.1250" (2-1/8) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes,...
HELSO1-02180
3 FL - Square - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 2.1250" (2-1/8) Reach - ZPLUS Coated
HELICAL
$61.75
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 2.1250" (2-1/8) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-86505