HELICAL
3 FL - Square - 40° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
- SKU:
- HELSO1-86064
- MPN:
- 86064
- Shipping:
- Calculated at Checkout
Description
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-Y-30250)
View AllClose
Additional Information
Cutter Diameter: |
0.2500" (1/4) |
Length of Cut: |
2.0000" (2) |
Overall Length: |
4.0000" (4) |
Flutes: |
3 |
LOC Multiple: |
(8x) |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 35¡ Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$59.80
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 35¡ Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-Y-30250)
HELSO1-88049
3 FL - Ball - 40° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$55.40
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-Y-30250-BN)
HELSO1-86972
3 FL - Square - 45° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$59.70
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-Y-30250)
HELSO1-82853
2 FL - Square - 45¡ Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$58.80
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45¡ Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-Y-20250)
HELSO1-88705
3 FL - Square - 40° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$53.25
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-Y-30250)
HELSO1-86065