HELICAL
3 FL - Square - 35° Helix - 6.000 mm Cutter DIA x 6.000 mm Shank DIA x 12.000 mm LOC x 63.000 mm OAL - Uncoated
- SKU:
- HELSO1-59726
- MPN:
- 59726
- Shipping:
- Calculated at Checkout
Description
6.000 mm Cutter DIA x 6.000 mm Shank DIA x 12.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-020-30600)
View AllClose
Additional Information
Cutter Diameter: |
6.000 mm |
Length of Cut: |
12.000 mm |
Overall Length: |
63.000 mm |
Flutes: |
3 |
LOC Multiple: |
(2x) |
Shank Diameter: |
6.000 mm |
Metric: |
Y |
Shank Length: |
51.000 mm |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 35° Helix - 6.000 mm Cutter DIA x 6.000 mm Shank DIA x 9.000 mm LOC x 63.000 mm OAL - Uncoated
HELICAL
$24.60
6.000 mm Cutter DIA x 6.000 mm Shank DIA x 9.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-015-30600)
HELSO1-59690
3 FL - Square - 35° Helix - 6.000 mm Cutter DIA x 6.000 mm Shank DIA x 18.000 mm LOC x 63.000 mm OAL - Uncoated
HELICAL
$28.90
6.000 mm Cutter DIA x 6.000 mm Shank DIA x 18.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (MH35AL-030-30600)
HELSO1-59794
3 FL - Square - 35° Helix - 3.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm LOC x 63.000 mm OAL - Uncoated
HELICAL
$16.60
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 3.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3...
HELSO1-89597
3 FL - Square - 35° Helix - 4.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm LOC x 63.000 mm OAL - Uncoated
HELICAL
$19.10
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 4.000 mm Cutter DIA x 6.000 mm Shank DIA x 6.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3...
HELSO1-89601
3 FL - Square - 35° Helix - 4.000 mm Cutter DIA x 6.000 mm Shank DIA x 12.000 mm LOC x 63.000 mm OAL - Uncoated
HELICAL
$20.70
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 4.000 mm Cutter DIA x 6.000 mm Shank DIA x 12.000 mm Length of Cut x 63.000 mm Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3...
HELSO1-89605