HELICAL
3 FL - Square - 35° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) LOC x 6.0000" (6) OAL - ZPLUS Coated
- SKU:
- HELSO1-01692
- MPN:
- 01692
- Shipping:
- Calculated at Checkout
Description
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) Length of Cut x 6.0000" (6) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-L-30750)
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Length of Cut: |
3.2500" (3-1/4) |
Overall Length: |
6.0000" (6) |
Flutes: |
3 |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.7500" (3/4) |
Metric: |
N |
Shank Length: |
2.7500" (2-3/4) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) LOC x 6.0000" (6) OAL - ZPLUS Coated
HELICAL
$273.45
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) Length of Cut x 6.0000" (6) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-L-30750)
HELSO1-03692
3 FL - Square - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) LOC x 6.0000" (6) OAL - ZPLUS Coated
HELICAL
$275.35
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) Length of Cut x 6.0000" (6) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-83526
3 FL - Square - 35° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) LOC x 6.0000" (6) OAL - Uncoated
HELICAL
$244.70
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) Length of Cut x 6.0000" (6) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-L-30750)
HELSO1-01690
2 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) LOC x 6.0000" (6) OAL - ZPLUS Coated
HELICAL
$268.85
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) Length of Cut x 6.0000" (6) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-L-20750)
HELSO1-00692
3 FL - Ball - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) LOC x 6.0000" (6) OAL - ZPLUS Coated
HELICAL
$296.15
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 3.2500" (3-1/4) Length of Cut x 6.0000" (6) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-86085