HELICAL
3 FL - Square - 35° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - Uncoated
- SKU:
- HELSO1-01675
- MPN:
- 01675
- Shipping:
- Calculated at Checkout
Description
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-M-30750)
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Length of Cut: |
2.2500" (2-1/4) |
Overall Length: |
5.0000" (5) |
Flutes: |
3 |
LOC Multiple: |
(3x) |
Shank Diameter: |
0.7500" (3/4) |
Metric: |
N |
Shank Length: |
2.7500" (2-3/4) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$243.70
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-M-30750)
HELSO1-48655
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$227.40
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-M-30750)
HELSO1-03675
2 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$223.10
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-M-20750)
HELSO1-00675
5 FL - Square - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$300.90
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.2500" (2-1/4) Length of Cut x 5.0000" (5) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, Uncoated - (HVAL-030-50750)
HELSO1-89001
3 FL - Square - 35° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.7500" (2-3/4) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$237.60
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.7500" (2-3/4) Length of Cut x 5.0000" (5) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-ML-30750)
HELSO1-81373