HELICAL
3 FL - Square - 35° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - Uncoated
- SKU:
- HELSO1-01660
- MPN:
- 01660
- Shipping:
- Calculated at Checkout
Description
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-R-30750)
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Length of Cut: |
1.6250" (1-5/8) |
Overall Length: |
4.0000" (4) |
Flutes: |
3 |
LOC Multiple: |
(2x) |
Shank Diameter: |
0.7500" (3/4) |
Metric: |
N |
Shank Length: |
2.3750" (2-3/8) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$176.80
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-R-30750)
HELSO1-03660
3 FL - Square - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$192.00
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-R-30750)
HELSO1-48620
5 FL - Square - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$272.10
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, Uncoated - (HVAL-021-50750)
HELSO1-88999
3 FL - Square - 35° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$159.60
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30750)
HELSO1-01645
3 FL - Ball - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$221.10
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-R-30750-BN)
HELSO1-49405