HELICAL
3 FL - Square - 35° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 4.2500" (4-1/4) Reach - ZPLUS Coated
- SKU:
- HELSO1-04327
- MPN:
- 04327
- Shipping:
- Calculated at Checkout
Description
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 4.2500" (4-1/4) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-RN-X-30500)
View AllClose
Additional Information
Cutter Diameter: |
0.5000" (1/2) |
Neck Diameter: |
0.4750" |
Length of Cut: |
0.6250" (5/8) |
Overall Reach: |
4.2500" (4-1/4) |
Overall Length: |
6.0000" (6) |
Flutes: |
3 |
LOC Multiple: |
(1x) |
Reach Multiple: |
(8x) |
Shank Diameter: |
0.5000" (1/2) |
Metric: |
N |
Shank Length: |
1.7500" (1-3/4) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 4.2500" (4-1/4) Reach - ZPLUS Coated
HELICAL
$142.25
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 4.2500" (4-1/4) Reach Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-19327
3 FL - Square - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 4.2500" (4-1/4) Reach - ZPLUS Coated
HELICAL
$127.05
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 4.2500" (4-1/4) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-46391
2 FL - Square - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 4.2500" (4-1/4) Reach - ZPLUS Coated
HELICAL
$138.05
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 4.2500" (4-1/4) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS...
HELSO1-02327
3 FL - Square - 35° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 4.2500" (4-1/4) Reach - Uncoated
HELICAL
$117.30
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 4.2500" (4-1/4) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-04325
2 FL - Ball - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) LOC x 6.0000" (6) OAL x 4.2500" (4-1/4) Reach - ZPLUS Coated
HELICAL
$146.75
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.6250" (5/8) Length of Cut x 6.0000" (6) Overall Length x 4.2500" (4-1/4) Reach Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, ZPLUS...
HELSO1-18327