HELICAL
3 FL - Square - 35° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
- SKU:
- HELSO1-01390
- MPN:
- 01390
- Shipping:
- Calculated at Checkout
Description
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-LX-30375)
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Length of Cut: |
2.0000" (2) |
Overall Length: |
4.0000" (4) |
Flutes: |
3 |
LOC Multiple: |
(5x) |
Shank Diameter: |
0.3750" (3/8) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$64.70
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-LX-30375)
HELSO1-82395
3 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$70.70
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-LX-30375)
HELSO1-03390
2 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$69.50
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-LX-20375)
HELSO1-00390
3 FL - Ball - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$77.40
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-LX-30375-BN)
HELSO1-82463
3 FL - Square - 35° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$82.75
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-LX-30375)
HELSO1-01392