HELICAL
3 FL - Square - 35° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
- SKU:
- HELSO1-01345
- MPN:
- 01345
- Shipping:
- Calculated at Checkout
Description
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-R-30375)
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Length of Cut: |
1.0000" (1) |
Overall Length: |
3.0000" (3) |
Flutes: |
3 |
LOC Multiple: |
(2.5x) |
Shank Diameter: |
0.3750" (3/8) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$39.20
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-R-30375)
HELSO1-03345
5 FL - Square - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$58.30
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Square End Mill for Aluminum, 5 Flutes, Uncoated - (HVAL-026-50375)
HELSO1-88987
3 FL - Square - 35¡ Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 3.0000" (3) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$96.10
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 3.0000" (3) Length of Cut x 5.0000" (5) Overall Length Carbide 35¡ Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-Y-30375)
HELSO1-88053
3 FL - Square - 35° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$51.10
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-R-30375)
HELSO1-01347
2 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$38.50
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-R-20375)
HELSO1-00345