HELICAL
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) LOC x 4.0000" (4) OAL - ZPLUS Coated
- SKU:
- HELSO1-83436
- MPN:
- 83436
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-LX-30312)
View AllClose
Additional Information
Cutter Diameter: |
0.3125" (5/16) |
Length of Cut: |
1.5625" (1-9/16) |
Overall Length: |
4.0000" (4) |
Flutes: |
3 |
LOC Multiple: |
(5x) |
Shank Diameter: |
0.3125" (5/16) |
Metric: |
N |
Shank Length: |
2.4375" (2-7/16) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$56.25
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-86067
2 FL - Square - 45¡ Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$75.85
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) Length of Cut x 4.0000" (4) Overall Length Carbide 45¡ Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated -...
HELSO1-88708
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$62.80
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-LX-30312)
HELSO1-83435
3 FL - Ball - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$68.45
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-86975
5 FL - Square - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) LOC x 4.0000" (4) OAL - APLUS Coated
HELICAL
$58.50
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 1.5625" (1-9/16) Length of Cut x 4.0000" (4) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-LX-50312)
HELSO1-82520