HELICAL
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
- SKU:
- HELSO1-01257
- MPN:
- 01257
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-R-30312)
View AllClose
Additional Information
Cutter Diameter: |
0.3125" (5/16) |
Length of Cut: |
0.6250" (5/8) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
3 |
LOC Multiple: |
(2x) |
Shank Diameter: |
0.3125" (5/16) |
Metric: |
N |
Shank Length: |
1.8750" (1-7/8) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 35¡ Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.5000" (2-1/2) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$80.15
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.5000" (2-1/2) Length of Cut x 4.0000" (4) Overall Length Carbide 35¡ Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-88052
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$31.80
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-R-30312)
HELSO1-01255
5 FL - Square - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - APLUS Coated
HELICAL
$38.90
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Steel, 5 Flutes, APLUS Coated - (HEV-SR-50312)
HELSO1-84631
3 FL - Ball - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$54.60
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for...
HELSO1-89213
5 FL - Square - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - TPLUS Coated
HELICAL
$50.75
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Square End Mill for Stainless and High Temp, 5 Flutes, TPLUS Coated -...
HELSO1-88252