HELICAL
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.7500" (1-3/4) Reach - Uncoated
- SKU:
- HELSO1-83447
- MPN:
- 83447
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.7500" (1-3/4) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-RN-A-30312)
View AllClose
Additional Information
Cutter Diameter: |
0.3125" (5/16) |
Neck Diameter: |
0.2960" |
Length of Cut: |
0.4375" (7/16) |
Overall Reach: |
1.7500" (1-3/4) |
Overall Length: |
4.0000" (4) |
Flutes: |
3 |
LOC Multiple: |
(1.4x) |
Shank Diameter: |
0.3125" (5/16) |
Metric: |
N |
Shank Length: |
2.2500" (2-1/4) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.7500" (1-3/4) Reach - Uncoated
HELICAL
$40.50
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.7500" (1-3/4) Reach Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-83713
3 FL - Square - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.7500" (1-3/4) Reach - Uncoated
HELICAL
$47.90
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.7500" (1-3/4) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-86502
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.7500" (1-3/4) Reach - ZPLUS Coated
HELICAL
$54.95
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.7500" (1-3/4) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-83448
3 FL - Ball - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.7500" (1-3/4) Reach - Uncoated
HELICAL
$60.00
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.7500" (1-3/4) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes,...
HELSO1-86514
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 6.0000" (6) OAL x 4.0000" (4) Reach - Uncoated
HELICAL
$92.70
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 6.0000" (6) Overall Length x 4.0000" (4) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated...
HELSO1-04200