HELICAL
3 FL - Square - 35° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) LOC x 4.0000" (4) OAL - ZPLUS Coated
- SKU:
- HELSO1-81370
- MPN:
- 81370
- Shipping:
- Calculated at Checkout
Description
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-X-30250)
View AllClose
Additional Information
Cutter Diameter: |
0.2500" (1/4) |
Length of Cut: |
1.7500" (1-3/4) |
Overall Length: |
4.0000" (4) |
Flutes: |
3 |
LOC Multiple: |
(7x) |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Shank Length: |
2.2500" (2-1/4) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$67.65
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-X-30250)
HELSO1-03212
3 FL - Square - 40° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$52.35
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-83524
2 FL - Square - 45° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$66.65
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-X-20250)
HELSO1-00212
3 FL - Ball - 40° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$63.35
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-86079
3 FL - Square - 35° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$58.90
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 1.7500" (1-3/4) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-X-30250)
HELSO1-81369