HELICAL
3 FL - Square - 35° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
- SKU:
- HELSO1-01157
- MPN:
- 01157
- Shipping:
- Calculated at Checkout
Description
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-SR-30250)
View AllClose
Additional Information
Cutter Diameter: |
0.2500" (1/4) |
Length of Cut: |
0.5000" (1/2) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
3 |
LOC Multiple: |
(2x) |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$35.20
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-03157
2 FL - Square - 45° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$34.90
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated -...
HELSO1-00157
3 FL - Square - 35° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$27.50
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-SR-30250)
HELSO1-01155
2 FL - Ball - 45° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$37.40
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, ZPLUS Coated -...
HELSO1-17157
3 FL - Ball - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$48.10
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for...
HELSO1-89203