HELICAL
3 FL - Square - 35° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) LOC x 3.0000" (3) OAL - ZPLUS Coated
- SKU:
- HELSO1-83434
- MPN:
- 83434
- Shipping:
- Calculated at Checkout
Description
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) Length of Cut x 3.0000" (3) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-LX-30187)
View AllClose
Additional Information
Cutter Diameter: |
0.1875" (3/16) |
Length of Cut: |
1.1875" (1-3/16) |
Overall Length: |
3.0000" (3) |
Flutes: |
3 |
LOC Multiple: |
(6.3x) |
Shank Diameter: |
0.1875" (3/16) |
Metric: |
N |
Shank Length: |
1.8125" (1-13/16) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$40.55
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-86963
3 FL - Square - 45° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$46.75
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) Length of Cut x 3.0000" (3) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-82852
2 FL - Square - 45¡ Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$46.35
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) Length of Cut x 3.0000" (3) Overall Length Carbide 45¡ Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated -...
HELSO1-88702
3 FL - Ball - 40° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) LOC x 3.0000" (3) OAL - ZPLUS Coated
HELICAL
$47.55
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-86971
3 FL - Square - 35° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$43.70
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.1875" (1-3/16) Length of Cut x 3.0000" (3) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-LX-30187)
HELSO1-83433