HELICAL
3 FL - Square - 35° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - Uncoated
- SKU:
- HELSO1-81365
- MPN:
- 81365
- Shipping:
- Calculated at Checkout
Description
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-L-30187)
View AllClose
Additional Information
Cutter Diameter: |
0.1875" (3/16) |
Length of Cut: |
1.0000" (1) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
3 |
LOC Multiple: |
(5x) |
Shank Diameter: |
0.1875" (3/16) |
Metric: |
N |
Shank Length: |
1.5000" (1-1/2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$38.00
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-ML-30187)
HELSO1-81553
2 FL - Square - 45° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$37.30
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-ML-20187)
HELSO1-81311
3 FL - Square - 35° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$44.85
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-81366
3 FL - Square - 35° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.5625" (9/16) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$22.90
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.5625" (9/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated -...
HELSO1-01105
2 FL - Ball - 45° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$42.40
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-ML-20187-BN)
HELSO1-83415