HELICAL
3 FL - Square - 35° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
- SKU:
- HELSO1-83431
- MPN:
- 83431
- Shipping:
- Calculated at Checkout
Description
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-SR-30187)
View AllClose
Additional Information
Cutter Diameter: |
0.1875" (3/16) |
Length of Cut: |
0.4375" (7/16) |
Overall Length: |
2.0000" (2) |
Flutes: |
3 |
LOC Multiple: |
(2.3x) |
Shank Diameter: |
0.1875" (3/16) |
Metric: |
N |
Shank Length: |
1.5625" (1-9/16) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$22.10
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-SR-30187)
HELSO1-87062
2 FL - Square - 45° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$21.40
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-SR-20187)
HELSO1-83409
3 FL - Ball - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$28.60
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide Ball End Mill for...
HELSO1-89194
3 FL - Square - 35° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.4375" (7/16) LOC x 2.0000" (2) OAL - ZPLUS Coated
HELICAL
$28.15
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.4375" (7/16) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-83432
3 FL - Square - 35° Helix - 0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$21.00
0.1875" (3/16) Cutter DIA x 0.1875" (3/16) Shank DIA x 0.3125" (5/16) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-S-30187)
HELSO1-01090