HELICAL
3 FL - Square - 35° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated
- SKU:
- HELSO1-01030
- MPN:
- 01030
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-SR-30125)
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Length of Cut: |
0.3750" (3/8) |
Overall Length: |
2.0000" (2) |
Flutes: |
3 |
LOC Multiple: |
(3x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Shank Length: |
1.6250" (1-5/8) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$28.60
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-SR-30125)
HELSO1-48010
3 FL - Square - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$20.00
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-SR-30125)
HELSO1-03030
2 FL - Square - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$19.40
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-SR-20125)
HELSO1-00030
3 FL - Ball - 40° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$34.00
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-SR-30125-BN)
HELSO1-49035
3 FL - Ball - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$26.10
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide Ball End Mill for...
HELSO1-89186