HELICAL
3 FL - Corner Radius - 45° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 0.0300" Radius x 4.1250" (4-1/8) LOC x 7.0000" (7) OAL - Uncoated
- SKU:
- HELSO1-29705
- MPN:
- 29705
- Shipping:
- Calculated at Checkout
Description
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 0.0300" Radius x 4.1250" (4-1/8) Length of Cut x 7.0000" (7) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-C-X-31000-R.030)
View AllClose
Additional Information
Cutter Diameter: |
1.0000" (1) |
Length of Cut: |
4.1250" (4-1/8) |
Overall Length: |
7.0000" (7) |
Corner Radius: |
0.0300" |
Flutes: |
3 |
LOC Multiple: |
(4x) |
Shank Diameter: |
1.0000" (1) |
Metric: |
N |
Shank Length: |
2.8750" (2-7/8) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
Y |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
Out of stock
3 FL - Corner Radius - 45° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 0.0300" Radius x 4.1250" (4-1/8) LOC x 7.0000" (7) OAL - ZPLUS Coated
HELICAL
$623.85
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 0.0300" Radius x 4.1250" (4-1/8) Length of Cut x 7.0000" (7) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-29707
7 FL - Corner Radius - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 0.0300" Radius x 4.1250" (4-1/8) LOC x 7.0000" (7) OAL - TPLUS Coated
HELICAL
$648.90
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 0.0300" Radius x 4.1250" (4-1/8) Length of Cut x 7.0000" (7) Overall Length Carbide Corner Radius End Mill for Stainless and High Temp, 7 Flutes,...
HELSO1-87208
7 FL - Corner Radius - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 0.0300" Radius x 4.1250" (4-1/8) LOC x 7.0000" (7) OAL - APLUS Coated
HELICAL
$595.30
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 0.0300" Radius x 4.1250" (4-1/8) Length of Cut x 7.0000" (7) Overall Length Carbide Corner Radius End Mill for Steel, 7 Flutes, APLUS Coated -...
HELSO1-87190
3 FL - Square - 45° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.1250" (4-1/8) LOC x 7.0000" (7) OAL - Uncoated
HELICAL
$559.20
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 4.1250" (4-1/8) Length of Cut x 7.0000" (7) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-X-31000)
HELSO1-03795
Out of stock
3 FL - Corner Radius - 45° Helix - 1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 0.0300" Radius x 1.2500" (1-1/4) LOC x 7.0000" (7) OAL x 4.3750" (4-3/8) Reach - Uncoated
HELICAL
$425.35
1.0000" (1) Cutter DIA x 1.0000" (1) Shank DIA x 0.0300" Radius x 1.2500" (1-1/4) Length of Cut x 7.0000" (7) Overall Length x 4.3750" (4-3/8) Reach Carbide 45° Helix Corner Radius End Mill for...
HELSO1-28495