HELICAL
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated, 83667
- SKU:
- HELSO1-83667
- MPN:
- 83667
- Shipping:
- Calculated at Checkout
Description
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-L-30500-R.020)
View AllClose
Additional Information
Cutter Diameter: |
0.5000" (1/2) |
Length of Cut: |
2.0000" (2) |
Overall Length: |
4.0000" (4) |
Corner Radius: |
0.0200" |
Flutes: |
3 |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.5000" (1/2) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$99.00
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated...
HELSO1-86598
3 FL - Corner Radius - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$96.00
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated...
HELSO1-83547
2 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$63.97
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 2 Flutes, Uncoated...
HELSO1-82371
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0600" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$99.00
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0600" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated...
HELSO1-82743
Out of stock
3 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$115.85
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated...
HELSO1-29435