HELICAL
3 FL - Corner Radius - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated, 83634
- SKU:
- HELSO1-83634
- MPN:
- 83634
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-R-30312-R.030)
View AllClose
Additional Information
Cutter Diameter: |
0.3125" (5/16) |
Length of Cut: |
0.8125" (13/16) |
Overall Length: |
2.5000" (2-1/2) |
Corner Radius: |
0.0300" |
Flutes: |
3 |
LOC Multiple: |
(2.6x) |
Shank Diameter: |
0.3125" (5/16) |
Metric: |
N |
Shank Length: |
1.6875" (1-11/16) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Corner Radius - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$54.50
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0200" Radius x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-29227
3 FL - Corner Radius - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0100" Radius x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated, 83628
HELICAL
$48.40
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0100" Radius x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-83628
3 FL - Corner Radius - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0600" Radius x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated, 83640
HELICAL
$48.40
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0600" Radius x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-83640
5 FL - Corner Radius - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - APLUS Coated
HELICAL
$52.10
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Corner Radius End Mill for Steel, 5 Flutes, APLUS Coated...
HELSO1-45182
5 FL - Corner Radius - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.8125" (13/16) LOC x 2.5000" (2-1/2) OAL - TPLUS Coated
HELICAL
$64.50
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.0300" Radius x 0.8125" (13/16) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Corner Radius End Mill for Stainless and High Temp, 5...
HELSO1-82988