HELICAL
3 FL - Corner Radius - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated, 81583
- SKU:
- HELSO1-81583
- MPN:
- 81583
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-SR-30125-R.010)
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Length of Cut: |
0.3750" (3/8) |
Overall Length: |
2.0000" (2) |
Corner Radius: |
0.0100" |
Flutes: |
3 |
LOC Multiple: |
(3x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Shank Length: |
1.6250" (1-5/8) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Corner Radius - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$25.90
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-86564
Out of stock
3 FL - Corner Radius - 35° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$25.90
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-82103
2 FL - Corner Radius - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$21.40
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 2 Flutes,...
HELSO1-82329
3 FL - Corner Radius - 40° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated
HELICAL
$30.50
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-82403
3 FL - Corner Radius - 35° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) LOC x 2.0000" (2) OAL - Uncoated , 59008
HELICAL
$19.55
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.0100" Radius x 0.3750" (3/8) Length of Cut x 2.0000" (2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-59008