HELICAL
3 FL - Corner Radius - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0200" Radius x 1.5000" (1-1/2) LOC x 3.5000" (3-1/2) OAL - Uncoated
- SKU:
- HELSO1-86142
- MPN:
- 86142
- Shipping:
- Calculated at Checkout
Description
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0200" Radius x 1.5000" (1-1/2) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-L-30375-R.020)
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Length of Cut: |
1.5000" (1-1/2) |
Overall Length: |
3.5000" (3-1/2) |
Corner Radius: |
0.0200" |
Flutes: |
3 |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.3750" (3/8) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Corner Radius - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0600" Radius x 1.5000" (1-1/2) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$71.80
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0600" Radius x 1.5000" (1-1/2) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-48325
3 FL - Corner Radius - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0900" Radius x 1.5000" (1-1/2) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$72.30
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0900" Radius x 1.5000" (1-1/2) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-48330
Out of stock
3 FL - Corner Radius - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0100" Radius x 1.5000" (1-1/2) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$71.80
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0100" Radius x 1.5000" (1-1/2) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-81435
3 FL - Corner Radius - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.5000" (1-1/2) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$71.80
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.5000" (1-1/2) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-48320
3 FL - Corner Radius - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.1250" (1/8) Radius x 1.5000" (1-1/2) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$71.80
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.1250" (1/8) Radius x 1.5000" (1-1/2) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3...
HELSO1-83535