HELICAL
3 FL - Corner Radius - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - ZPLUS Coated , 59177
- SKU:
- HELSO1-59177
- MPN:
- 59177
- Shipping:
- Calculated at Checkout
Description
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-R-30625-R.030)
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Length of Cut: |
1.6250" (1-5/8) |
Overall Length: |
3.5000" (3-1/2) |
Corner Radius: |
0.0300" |
Flutes: |
3 |
LOC Multiple: |
(2.5x) |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Shank Length: |
1.8750" (1-7/8) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Corner Radius - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - ZPLUS Coated
HELICAL
$145.95
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-82038
3 FL - Corner Radius - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - ZPLUS Coated
HELICAL
$156.55
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-29497
3 FL - Corner Radius - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0600" Radius x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - ZPLUS Coated
HELICAL
$145.95
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0600" Radius x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-82042
3 FL - Corner Radius - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$126.20
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-82037
3 FL - Corner Radius - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0600" Radius x 1.6250" (1-5/8) LOC x 3.5000" (3-1/2) OAL - ZPLUS Coated , 59179
HELICAL
$128.65
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0600" Radius x 1.6250" (1-5/8) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-59179