HELICAL
3 FL - Corner Radius - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0200" Radius x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - Uncoated , 59190
- SKU:
- HELSO1-59190
- MPN:
- 59190
- Shipping:
- Calculated at Checkout
Description
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0200" Radius x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-L-30625-R.020)
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Length of Cut: |
2.5000" (2-1/2) |
Overall Length: |
5.0000" (5) |
Corner Radius: |
0.0200" |
Flutes: |
3 |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Shank Length: |
2.5000" (2-1/2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Corner Radius - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - Uncoated , 59192
HELICAL
$164.35
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-59192
3 FL - Corner Radius - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0600" Radius x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - Uncoated , 59194
HELICAL
$167.70
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0600" Radius x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-59194
3 FL - Corner Radius - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$178.70
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-29525
3 FL - Corner Radius - 40° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$132.60
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.0300" Radius x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 40°...
HELSO1-89575
3 FL - Corner Radius - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.1250" (1/8) Radius x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - Uncoated , 59196
HELICAL
$167.70
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.1250" (1/8) Radius x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-59196