HELICAL
3 FL - Corner Radius - 35° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - Uncoated
- SKU:
- HELSO1-84838
- MPN:
- 84838
- Shipping:
- Calculated at Checkout
Description
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated - (H35ALV-C-025-30500-R.125)
View AllClose
Additional Information
Cutter Diameter: |
0.5000" (1/2) |
Length of Cut: |
1.2500" (1-1/4) |
Overall Length: |
3.0000" (3) |
Corner Radius: |
0.1250" (1/8) |
Flutes: |
3 |
LOC Multiple: |
(2.5x) |
Shank Diameter: |
0.5000" (1/2) |
Metric: |
N |
Shank Length: |
1.7500" (1-3/4) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
Y |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Corner Radius - 35° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - Uncoated , 59150
HELICAL
$59.35
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-59150
3 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$111.40
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius Coolant Through End Mill for Aluminum, 3...
HELSO1-88143
3 FL - Corner Radius - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$71.55
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-48420
3 FL - Corner Radius - 35° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0100" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$69.05
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0100" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-82139
3 FL - Corner Radius - 35° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$69.05
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0200" Radius x 1.2500" (1-1/4) Length of Cut x 3.0000" (3) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-82147