HELICAL
3 FL - Corner Radius - 35° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.5000" (1-1/2) LOC x 4.0000" (4) OAL - ZPLUS Coated
- SKU:
- HELSO1-84831
- MPN:
- 84831
- Shipping:
- Calculated at Checkout
Description
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.5000" (1-1/2) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35ALV-C-040-30375-R.030)
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Length of Cut: |
1.5000" (1-1/2) |
Overall Length: |
4.0000" (4) |
Corner Radius: |
0.0300" |
Flutes: |
3 |
LOC Multiple: |
(4x) |
Shank Diameter: |
0.3750" (3/8) |
Metric: |
N |
Shank Length: |
2.5000" (2-1/2) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
Y |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Corner Radius - 35° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.5000" (1-1/2) LOC x 4.0000" (4) OAL - ZPLUS Coated , 82788
HELICAL
$81.55
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.5000" (1-1/2) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-82788
Out of stock
3 FL - Corner Radius - 35° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.5000" (1-1/2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$71.85
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0300" Radius x 1.5000" (1-1/2) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-84830
3 FL - Corner Radius - 35¡ Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0900" Radius x 1.5000" (1-1/2) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$79.35
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0900" Radius x 1.5000" (1-1/2) Length of Cut x 4.0000" (4) Overall Length Carbide 35¡ Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-88030
3 FL - Corner Radius - 35¡ Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0150" (1/64) Radius x 1.5000" (1-1/2) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$79.35
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0150" (1/64) Radius x 1.5000" (1-1/2) Length of Cut x 4.0000" (4) Overall Length Carbide 35¡ Helix Corner Radius End Mill for Aluminum, 3...
HELSO1-88020
3 FL - Corner Radius - 35° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0100" Radius x 1.5000" (1-1/2) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$86.10
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.0100" Radius x 1.5000" (1-1/2) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-84829