HELICAL
3 FL - Corner Radius - 35° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0100" Radius x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated , 59043
- SKU:
- HELSO1-59043
- MPN:
- 59043
- Shipping:
- Calculated at Checkout
Description
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0100" Radius x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-R-30250-R.010)
View AllClose
Additional Information
Cutter Diameter: |
0.2500" (1/4) |
Length of Cut: |
0.6250" (5/8) |
Overall Length: |
2.5000" (2-1/2) |
Corner Radius: |
0.0100" |
Flutes: |
3 |
LOC Multiple: |
(2.5x) |
Shank Diameter: |
0.2500" (1/4) |
Metric: |
N |
Shank Length: |
1.8750" (1-7/8) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Corner Radius - 35° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0100" Radius x 0.5000" (1/2) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$46.70
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0100" Radius x 0.5000" (1/2) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-81992
3 FL - Corner Radius - 35° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0100" Radius x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$47.80
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0100" Radius x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-81994
3 FL - Corner Radius - 35° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0300" Radius x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated , 59049
HELICAL
$32.60
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0300" Radius x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-59049
3 FL - Corner Radius - 35° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0600" Radius x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated , 59051
HELICAL
$32.70
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0600" Radius x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-59051
3 FL - Corner Radius - 35° Helix - 0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated , 59047
HELICAL
$32.60
0.2500" (1/4) Cutter DIA x 0.2500" (1/4) Shank DIA x 0.0200" Radius x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 35° Helix Corner Radius End Mill for Aluminum, 3 Flutes,...
HELSO1-59047