HELICAL
3 FL - Corner Radius - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.1900" Radius x 1.0000" (1) LOC x 4.5000" (4-1/2) OAL x 3.0000" (3) Reach - Uncoated
- SKU:
- HELSO1-84580
- MPN:
- 84580
- Shipping:
- Calculated at Checkout
Description
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.1900" Radius x 1.0000" (1) Length of Cut x 4.5000" (4-1/2) Overall Length x 3.0000" (3) Reach Carbide Corner Radius Coolant Through High Balance End Mill for Aluminum, 3 Flutes, Uncoated - (HMGC-RN-040-30750-R.190)
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Neck Diameter: |
0.7120" |
Length of Cut: |
1.0000" (1) |
Overall Reach: |
3.0000" (3) |
Overall Length: |
4.5000" (4-1/2) |
Corner Radius: |
0.1900" |
Flutes: |
3 |
LOC Multiple: |
(1.3x) |
Shank Diameter: |
0.7500" (3/4) |
Metric: |
N |
Shank Length: |
1.5000" (1-1/2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.1900" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$173.80
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.1900" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide 40° Helix Corner Radius End Mill for Aluminum, 3 Flutes, Uncoated...
HELSO1-48610
3 FL - Corner Radius - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$200.90
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius Coolant Through End Mill for Aluminum, 3 Flutes,...
HELSO1-88089
3 FL - Corner Radius - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated
HELICAL
$204.10
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0600" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius Coolant Through End Mill for Aluminum, 3 Flutes,...
HELSO1-88147
3 FL - Corner Radius - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - Uncoated, 88145
HELICAL
$204.10
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius Coolant Through End Mill for Aluminum, 3 Flutes,...
HELSO1-88145
6 FL - Corner Radius - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.1900" Radius x 1.0000" (1) LOC x 3.0000" (3) OAL - APLUS Coated
HELICAL
$188.97
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.1900" Radius x 1.0000" (1) Length of Cut x 3.0000" (3) Overall Length Carbide Corner Radius End Mill for Steel, 6 Flutes, APLUS Coated -...
HELSO1-59358